S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

1.support more than 300 IC manufacturer, More than 80000 pcs devices.
2.Support devices with Vcc Voltages as low as 1.2v,extremely fast speed.

offer top quality S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog


S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog
 
Top 9 Reasons to Get S100 Ultra-high Speed Programmer:
1. Support More than 300 IC manufacturer, More than 80000 pcs devices.
2. Support devices with Vcc Voltages as low as 1.2V
3. Extremely fast speed. 64 Mb NOR FLASH memory in 12 seconds and 1Gb NAND in 110 seconds.
4. Built with 144 universal pin-drivers. Universal adaptors are available for varies packages up to 144 pins. New device support will be easier.
5. The programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
6. ISP/ICP programming capability available via ISP/ICP adaptor.
7. Only IC manufacturer approved programming algorithms are used for high reliability. (+5%~-5%) and (10%~-10%) Vcc verification enhances programming reliability.
8. Over-current and over-voltage protection for safety of the chip and programmer hardware.
9. Windows XP/Vista/Win7 compatibility
 
Hardware & Electrical Specifications:
 
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND)n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU. .
Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
PC interface: USB2.0

Power:
 
Power source: 100~240 V AC 50~60 Hz
Power consumption: ~0.5 A
Dimension(W*D*H): 134mm*188mm*65mm
Operation temperature: 0 ~ 40 C (32 ~ 105 F)
 
Package List:
 
1pc x S100 Ultra-high Speed Stand-alone Universal Device Programmer
 
 

Go to Buy: S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

Tags: Device Programmer, S-100 Device Programmer , Universal Device Programmer
Prev: Linde Doctor Diagnostic Cable With Software V2014 (6Pin and 4Pin Connectors)
Next: Original X431 PRO3 Launch Scanner X431 V+ Diagnostic full ECU system Car scan tool with Wifi/Bluetooth accessorie