VCM2 Diagnostic Scanner For Ford V112 and for LandRover & Jaguar JLR SDD V142

VCM2 Diagnostic Scanner For Ford V112 and for LandRover & Jaguar JLR SDD V142

V100 VCM2 for Ford LandRover & Jaguar 2 in 1.
1. Used for the majority of the JLR SDD diagnostic applicationst.
2. Provides dealer-level diagnostics using the IDS software.
3. Support Wifi Function.

offer top quality VCM2 Diagnostic Scanner For Ford V112 and for LandRover & Jaguar JLR SDD V142

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of VCM2 Diagnostic Scanner For Ford V112 and for LandRover & Jaguar JLR SDD V142

VCM2 Diagnostic Tool Support Wifi for FORD LandRover & Jaguar 2 in 1
 
Buy it for 6 Reasons:
 
1. This VCM2 support three models: FORD, LandRover and Jaguar
2. Software version:
    FORD V100
    LandRover & Jaguar V142
3. It supports WiFi function. ( needs customer buy Wifi card seperately)
4. Used for the majority of the JLR SDD diagnostic applicationst.
5. Provides full dealer diagnostic capabilities for most 16 pin Fords, including all new 2013 FORD vehicles
6. Support Multi Languages: Deutsch,English,Espano,francais, italiano, Netherlands, Portugues,Russian,Japanese,Chinese
 
VCM2 Diagnostic Tool Descriptions:
 
1. JLR Approved device
2. Replacement for JLR SDD VCM
3. Covers CAN, & ISO9141 vehicle networks
4. 12ft USB cable as standard included
5. Ford VCM II diagnostic tool is the new FORD OEM diagnostic tool
6. It is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications
7. It provides dealer-level diagnostics using the IDS software
8. The CFR replaces the Vehicle Data Recorder (VDR). 
9. It will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
10. It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).       
11. It has shock resistant rubber ends, making it suitable for garage and workshop environments.  
12. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.                                              
13. It is the brand new diagnostics interface from Fordfor use with the Integrated Diagnostics Software (IDS).      
14. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
 
Jaguar & Land Rover Vehicle Coverage:
 
JLR Vehicles  Supported?
Defender        Yes
Discovery /LR3/LR4        Yes
Range Rover Sport & 
New Range Rover Sport
      Yes
Range Rover       Yes*
New Range Rover       Yes
Freelander /LR2       Yes
Evoque       Yes
XJ – X300/X308       No
XJ - X350       No
XJ - X351      Yes
XJS       No
XK – X100       No
XK - X150      Yes
XF       Yes
S-Type        No
X-Type        No
F-Type       Yes        

(Yes) - Vehicle Line Fully Supported
(Yes*) -Vehicle line fully supported apart from viewing Data logger signals from both ECM and TCM 
               modules simultaneously on 2006MY variants 
(No) - Vehicle Line Not supported

VCM2 Diagnostic Tool Functions:
 
1. Program New Keys
2. DPF Regeneration
3. Brake Bleeding
4. Injector Coding
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Read & Clear Diagnostic Trouble Codes (DTCs)
11. Set, Adjust or Remove Speed Governors
12. Live Data-stream with Recording & Playback Functions for Main ECUs
13. The VCM2 for Land Rover connects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a USB cable for use with SDD.
14. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR SDD diagnostic tool.   
15. The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications.  
16. Only SCP communications are not possible with this device.
17. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
 
How Does the VCM2 Diagnostic Tool Operate in J2534 Mode? 
 
1. Please read the user manual firstly before using, install the software after watching the video or user manual in the DVD
2. Connect the J2534 device to the vehicle OBDII connector (the device powers from the vehicle).
3. Connect the 12ft USB cable to the J2534 device and the other end to the SDD laptop.
4. The red vehicle power (PWR) LED will illuminate to show that the device is powered.
5. During communication with the vehicle the status (STS) LED will flash green.
6. The device interacts with the SDD diagnostic tool in the same way as the existing VCM.
 
VCM2 Diagnostic Tool Package List:
 
2pc x CD
1pc x OBD2 Cable
1pc x USB Cable
1pc x Carrying Case
1pc x VCM2 interface
1pc x  Main Unit


Go to Buy: VCM2 Diagnostic Scanner For Ford V112 and for LandRover & Jaguar JLR SDD V142

Tags: OBD2 Tool For Ford, OBD2 tool for Jaguar , OBD2 Tool For Landrover , VCM , VCM II Diagnostic Tool , ford vcm2 , ford vcm 2 , vcm 2 , ford ids , vcm ii , ford vcm , ford vcm ids , ford diagnostic tool , ford vcm ii
Prev: V2015.03 New Design Multidiag Pro CDP+ For Cars/Trucks And OBD2 With Bluetooth and 4GB Card Plus Car Cables Support Win8
Next: Newest V112 IDS VCM 2 VCM II For Mazda Diagnostic System